Á½ÐÔÉ«ÎçÒ¹

Full Description

The Bachelor of Science degree in Mechatronics Engineering Technology successfully prepares graduates with knowledge across engineering disciplines for professional careers in mechatronics, controls, robotics, automation and related technological fields that provide solutions addressing societal needs and challenges. The program integrates mechanical, electrical, computer and controls. Mechatronics engineering technology revolves around the design, construction and operation of automated systems, robots and intelligent products, which result from the integration of software and hardware.

Using automated systems is becoming more popular for operating equipment/machinery in a host of situations, including on assembly and manufacturing lines, on automobiles and aircraft and in electrical power generations to reduce labor costs, increase precision and accuracy and provide quality and safety for workers.

Graduates from the mechatronics engineering technology program manage and support the design, operation and analysis of mechanical and electrical devices connected with automated systems, robots and computer-integrated manufacturing. They can work in any company that develops, designs or manufactures and markets these devices. Opportunities exist in manufacturing sales as well as research.

Applicants to this program should understand that this is a math-intensive program.

Students may apply early to the  and double count 9 credit hours of graduate courses toward both degree programs. See the  policy in the University Catalog for more information.

Admission Requirements

The university affirmatively strives to provide educational opportunities and access to students with varied backgrounds, those with special talents and adult students who graduated from high school three or more years ago.

First-Year Students on the Kent Campus: First-year admission policy on the Kent Campus is selective. Admission decisions are based upon cumulative grade point average, strength of high school college preparatory curriculum and grade trends. Students not admissible to the Kent Campus may be administratively referred to one of the seven regional campuses to begin their college coursework. For more information, visit the .

First-Year Students on the Regional Campuses: First-year admission to Á½ÐÔÉ«ÎçÒ¹’s campuses at Ashtabula, East Liverpool, Geauga, Salem, Stark, Trumbull and Tuscarawas, as well as the Twinsburg Academic Center, is open to anyone with a high school diploma or its equivalent. For more information on admissions, contact the Regional Campuses admissions offices.

International Students: All international students must provide proof of English language proficiency (unless they meet specific exceptions) by earning a minimum 525 TOEFL score (71 on the Internet-based version), minimum 75 MELAB score, minimum 6.0 IELTS score or minimum 48 PTE Academic score, or by completing the ELS level 112 Intensive Program. For more information, visit the admissions website for international students.

Transfer Students: Students who have attended any other educational institution after graduating from high school must apply as undergraduate transfer students. For more information, visit the admissions website for transfer students.

Former Students: Former Á½ÐÔÉ«ÎçÒ¹ students or graduates who have not attended another college or university since Á½ÐÔÉ«ÎçÒ¹ may complete the reenrollment or reinstatement form on the University Registrar’s website.

Admission policies for undergraduate students may be found in the University Catalog's .

Some programs may require that students meet certain requirements before progressing through the program. For programs with progression requirements, the information is shown on the program's Coursework tab.

Effective for the fall 2025 admission term:

Admission to the Mechatronics Engineering Technology major is selective.

New Students: Admission into this major requires a minimum 2.700 unweighted high school GPA. Students who do not meet this requirement will be admitted to the Applied Engineering and Technology Management concentration of the . Students may change their major to Mechatronics Engineering Technology after satisfying the below requirements for current students.

Note: Applicants should understand that this is a math-intensive program. Students admitted to the program are expected to demonstrate prerequisite knowledge on a math placement exam (the ALEKS exam) prior to starting their first semester. Students who do not obtain the minimum score required to place into MATH 11022 or MATH 12011 are at risk of delaying graduation.

Current Students: Students may change their major to Mechatronics Engineering Technology if they meet the following criteria:

• Minimum 2.500 overall Á½ÐÔÉ«ÎçÒ¹ GPA
• Minimum C grade in both and
• Minimum C grade in either or

Transfer Students: Transfer students must have completed minimum 12 credit hours of college-level coursework with a minimum 2.500 overall GPA for admission to the Mechatronics Engineering Technology major. Students with less than 12 credit hours completed will be evaluated based on their high school transcript using the criteria in the above "new student" section.

International Students: All international students must provide proof of English language proficiency (unless they meet specific exceptions to waive) by earning a minimum 71 TOEFL iBT score, minimum 6.0 IELTS score, minimum 47 PTE score or minimum 100 DET score, or by completing the ELS level 112 Intensive English Program. For more information on international admission visit the admissions website for international students.

Program Learning Outcomes

Graduates of this program will be able to:

1. Apply knowledge, techniques, skills and modern tools of mathematics, science, engineering and technology to solve broadly defined engineering problems appropriate to the discipline.
2. Design systems, components or processes meeting specified needs for broadly defined engineering problems appropriate to the discipline.
3. Apply written, oral and graphical communication in broadly defined technical and non-technical environments, and an ability to identify and use appropriate technical literature.
4. Conduct standard tests, measurements and experiments and analyze and interpret the results to improve processes.
5. Function effectively as a member as well as a leader on technical teams.

The educational objectives of the program are the following:

1. Drive positive change in the community by engaging in careers in the areas of mechatronics, automation, systems and other engineering technology fields in a robust manner that promotes excellence and integrity.
2. Practice forward-thinking through continued education by way of professional development, graduate education and other continued self-motivated learning.
3. Successfully navigate the ever-changing trajectory of the world, practicing compassion as you strive to meet your personal and professional goals.

Program Requirements

Major Requirements

¹

A minimum C grade must be earned to fulfill the writing-intensive requirement.

²

Students wishing to take the full-year capstone option ( and ) must take the sequence during consecutive semesters. is only offered during the fall semester and is only offered during the spring semester.

³

Students wishing to change their major to Mechatronics Engineering must take PHY 23101 and PHY 23102. Failing to do so will result in additional coursework.

Graduation Requirements

Roadmap

This roadmap is a recommended semester-by-semester plan of study for this major. However, courses designated as critical (!) must be completed in the semester listed to ensure a timely graduation.

• Delivery:
  • In person
• Location:
  • Kent Campus